Some Pentax DSLRs have a nifty exposure mode called Shutter and Aperture Priority (TAv), which allows you to dial in the aperture you want, the shutter speed you want, then let the camera pick the ISO automatically. This is useful if for example you have a specific aperture and shutter speed combination that you want.
At least some Nikon cameras can emulate that TAv function to some extent. Here's how:
1. Switch to manual exposure mode.
2. Turn on Auto ISO.
3. Dial in the aperture and shutter speed that you want.
You'll notice that Auto ISO will adjust your exposure upward or downward, up to as low as the base ISO to as high as the ISO limit that you set in the menus. You'll also notice that the light meter won't move as it usually does, instead showing 0 until you go beyond the minimum or maximum ISO. If you do want to adjust exposure to match your intent, you can use exposure compensation.
Here are test shots. The baseline shot is at ISO 800, f/4, 1/25, taken on manual exposure mode, matrix metering, with the light meter at 0. Let's assume that this is the correct exposure.
In the next shot, I activated Auto ISO, then changed the aperture and shutter to f/5.6, 1/50, with ISO initially at 800. ISO automatically adjusted to 2800, showing that Auto ISO will adjust upward as needed.
In the following shot, I changed the aperture and shutter to f/2.8, 1/13 with ISO initially at 800. ISO automatically adjusted to 220, showing that Auto ISO will also adjust downward as needed.
In this shot, I changed the aperture and shutter to f/2.8, 1/6. ISO could not adjust below the base ISO (ISO 200 for the D300), resulting in overexposure (you do get a warning of sorts because the light meter will show an overexposure).
Techniques, Tools, Resources, Real World Gear Reviews and Flash Tutorials for taking better candid and family photos.
Showing posts with label shutter speed. Show all posts
Showing posts with label shutter speed. Show all posts
Tuesday, August 31, 2010
Wednesday, July 21, 2010
Why is sync speed optimal for flash efficiency? (Basic)
When using flash, shooting at the sync speed ensures that you're using your flash most efficiently. Here's why.
Aperture affects both ambient and flash exposure. The larger the aperture, the more light enters the sensor (from both flash and ambient). The most output from your flash will result from the widest aperture. The catch though is that a wider aperture will also increase the ambient exposure, possibly to the point of overexposure.
Enter shutter speed. Shutter speed affects ambient but not flash exposure (up to a limit, as discussed below). The duration of a burst of flash is so brief that whether the shutter travels quickly or slowly, all of the flash burst reaches the sensor. That is, of course, assuming the entire sensor is exposed.
Indeed, the entire sensor is fully exposed at typical shutter speeds. At a high shutter speed, however, the rear curtain starts to close even before the front curtain has traveled completely, therefore the sensor is never fully exposed at any given time. When the flash is fired at these very high speeds, the part that is covered by the rear curtain will not be exposed to flash, leading to uneven exposure which is visible as a dark bar across the bottom or top of the image. The highest shutter speed where the entire sensor is fully exposed is the camera's sync speed. Typical sync speeds are 1/200 or 1/250, but sometimes as slow as 1/125 and as high as 1/500. (Trivia: medium format cameras with leaf shutter lenses can sync at all speeds, and point-and-shoots can sync at any speed because they don't have mechanical shutters :-D ) By default, cameras usually prevent the use of shutter speeds faster than the sync speed when the flash is being used.
Going back to the discussion, higher shutter speeds will nonetheless reduce ambient exposure. We use this to our advantage using the reciprocal relationship between shutter speed and aperture for any given exposure. Let's say it's a bright, sunny day, and the correct exposure is f/16 at 1/125 at 100 ISO. Under the reciprocity principle, you can get the same exposure with any of these combinations:
f/11 at 1/250 at 100 ISO
f/16 at 1/125 at 100 ISO
f/22 at 1/60 at 100 ISO
Of the three combinations above, the one that will require the least power from the flash is the one with the widest aperture, i.e., f/11 at 1/250 at 100 ISO.
Does that mean we should just use aperture priority and always choose the widest aperture to get the most from our flash? Not necessarily. If conditions are bright and aperture is wide, then the shutter speed can be pretty high -- higher than the sync speed. In the example above, suppose we had a lens that can go as wide as f/2.8. If we change aperture to f/2.8, the shutter speed for the same exposure would be 1/4000, which is way faster than the sync speed.
What about high speed sync mode? External flashes can fire at shutter speeds higher than the natural sync speed at the expense of output by firing many small flash bursts (instead of a single flash burst) while the rear curtain travels across the sensor. With HSS, however, the flash loses slightly more than 2 stops of output. In other words, it becomes more than 4x weaker. In other words, its range drops to slightly less than half. You get the idea.
In summary, if you want to maximize your flash while minimizing your ambient, shoot at the sync speed.
Aperture affects both ambient and flash exposure. The larger the aperture, the more light enters the sensor (from both flash and ambient). The most output from your flash will result from the widest aperture. The catch though is that a wider aperture will also increase the ambient exposure, possibly to the point of overexposure.
Enter shutter speed. Shutter speed affects ambient but not flash exposure (up to a limit, as discussed below). The duration of a burst of flash is so brief that whether the shutter travels quickly or slowly, all of the flash burst reaches the sensor. That is, of course, assuming the entire sensor is exposed.
Indeed, the entire sensor is fully exposed at typical shutter speeds. At a high shutter speed, however, the rear curtain starts to close even before the front curtain has traveled completely, therefore the sensor is never fully exposed at any given time. When the flash is fired at these very high speeds, the part that is covered by the rear curtain will not be exposed to flash, leading to uneven exposure which is visible as a dark bar across the bottom or top of the image. The highest shutter speed where the entire sensor is fully exposed is the camera's sync speed. Typical sync speeds are 1/200 or 1/250, but sometimes as slow as 1/125 and as high as 1/500. (Trivia: medium format cameras with leaf shutter lenses can sync at all speeds, and point-and-shoots can sync at any speed because they don't have mechanical shutters :-D ) By default, cameras usually prevent the use of shutter speeds faster than the sync speed when the flash is being used.
Going back to the discussion, higher shutter speeds will nonetheless reduce ambient exposure. We use this to our advantage using the reciprocal relationship between shutter speed and aperture for any given exposure. Let's say it's a bright, sunny day, and the correct exposure is f/16 at 1/125 at 100 ISO. Under the reciprocity principle, you can get the same exposure with any of these combinations:
f/11 at 1/250 at 100 ISO
f/16 at 1/125 at 100 ISO
f/22 at 1/60 at 100 ISO
Of the three combinations above, the one that will require the least power from the flash is the one with the widest aperture, i.e., f/11 at 1/250 at 100 ISO.
Does that mean we should just use aperture priority and always choose the widest aperture to get the most from our flash? Not necessarily. If conditions are bright and aperture is wide, then the shutter speed can be pretty high -- higher than the sync speed. In the example above, suppose we had a lens that can go as wide as f/2.8. If we change aperture to f/2.8, the shutter speed for the same exposure would be 1/4000, which is way faster than the sync speed.
What about high speed sync mode? External flashes can fire at shutter speeds higher than the natural sync speed at the expense of output by firing many small flash bursts (instead of a single flash burst) while the rear curtain travels across the sensor. With HSS, however, the flash loses slightly more than 2 stops of output. In other words, it becomes more than 4x weaker. In other words, its range drops to slightly less than half. You get the idea.
In summary, if you want to maximize your flash while minimizing your ambient, shoot at the sync speed.
Subscribe to:
Posts (Atom)