Some Pentax DSLRs have a nifty exposure mode called Shutter and Aperture Priority (TAv), which allows you to dial in the aperture you want, the shutter speed you want, then let the camera pick the ISO automatically. This is useful if for example you have a specific aperture and shutter speed combination that you want.
At least some Nikon cameras can emulate that TAv function to some extent. Here's how:
1. Switch to manual exposure mode.
2. Turn on Auto ISO.
3. Dial in the aperture and shutter speed that you want.
You'll notice that Auto ISO will adjust your exposure upward or downward, up to as low as the base ISO to as high as the ISO limit that you set in the menus. You'll also notice that the light meter won't move as it usually does, instead showing 0 until you go beyond the minimum or maximum ISO. If you do want to adjust exposure to match your intent, you can use exposure compensation.
Here are test shots. The baseline shot is at ISO 800, f/4, 1/25, taken on manual exposure mode, matrix metering, with the light meter at 0. Let's assume that this is the correct exposure.
In the next shot, I activated Auto ISO, then changed the aperture and shutter to f/5.6, 1/50, with ISO initially at 800. ISO automatically adjusted to 2800, showing that Auto ISO will adjust upward as needed.
In the following shot, I changed the aperture and shutter to f/2.8, 1/13 with ISO initially at 800. ISO automatically adjusted to 220, showing that Auto ISO will also adjust downward as needed.
In this shot, I changed the aperture and shutter to f/2.8, 1/6. ISO could not adjust below the base ISO (ISO 200 for the D300), resulting in overexposure (you do get a warning of sorts because the light meter will show an overexposure).
Techniques, Tools, Resources, Real World Gear Reviews and Flash Tutorials for taking better candid and family photos.
Showing posts with label aperture. Show all posts
Showing posts with label aperture. Show all posts
Tuesday, August 31, 2010
Wednesday, July 21, 2010
Why is sync speed optimal for flash efficiency? (Basic)
When using flash, shooting at the sync speed ensures that you're using your flash most efficiently. Here's why.
Aperture affects both ambient and flash exposure. The larger the aperture, the more light enters the sensor (from both flash and ambient). The most output from your flash will result from the widest aperture. The catch though is that a wider aperture will also increase the ambient exposure, possibly to the point of overexposure.
Enter shutter speed. Shutter speed affects ambient but not flash exposure (up to a limit, as discussed below). The duration of a burst of flash is so brief that whether the shutter travels quickly or slowly, all of the flash burst reaches the sensor. That is, of course, assuming the entire sensor is exposed.
Indeed, the entire sensor is fully exposed at typical shutter speeds. At a high shutter speed, however, the rear curtain starts to close even before the front curtain has traveled completely, therefore the sensor is never fully exposed at any given time. When the flash is fired at these very high speeds, the part that is covered by the rear curtain will not be exposed to flash, leading to uneven exposure which is visible as a dark bar across the bottom or top of the image. The highest shutter speed where the entire sensor is fully exposed is the camera's sync speed. Typical sync speeds are 1/200 or 1/250, but sometimes as slow as 1/125 and as high as 1/500. (Trivia: medium format cameras with leaf shutter lenses can sync at all speeds, and point-and-shoots can sync at any speed because they don't have mechanical shutters :-D ) By default, cameras usually prevent the use of shutter speeds faster than the sync speed when the flash is being used.
Going back to the discussion, higher shutter speeds will nonetheless reduce ambient exposure. We use this to our advantage using the reciprocal relationship between shutter speed and aperture for any given exposure. Let's say it's a bright, sunny day, and the correct exposure is f/16 at 1/125 at 100 ISO. Under the reciprocity principle, you can get the same exposure with any of these combinations:
f/11 at 1/250 at 100 ISO
f/16 at 1/125 at 100 ISO
f/22 at 1/60 at 100 ISO
Of the three combinations above, the one that will require the least power from the flash is the one with the widest aperture, i.e., f/11 at 1/250 at 100 ISO.
Does that mean we should just use aperture priority and always choose the widest aperture to get the most from our flash? Not necessarily. If conditions are bright and aperture is wide, then the shutter speed can be pretty high -- higher than the sync speed. In the example above, suppose we had a lens that can go as wide as f/2.8. If we change aperture to f/2.8, the shutter speed for the same exposure would be 1/4000, which is way faster than the sync speed.
What about high speed sync mode? External flashes can fire at shutter speeds higher than the natural sync speed at the expense of output by firing many small flash bursts (instead of a single flash burst) while the rear curtain travels across the sensor. With HSS, however, the flash loses slightly more than 2 stops of output. In other words, it becomes more than 4x weaker. In other words, its range drops to slightly less than half. You get the idea.
In summary, if you want to maximize your flash while minimizing your ambient, shoot at the sync speed.
Aperture affects both ambient and flash exposure. The larger the aperture, the more light enters the sensor (from both flash and ambient). The most output from your flash will result from the widest aperture. The catch though is that a wider aperture will also increase the ambient exposure, possibly to the point of overexposure.
Enter shutter speed. Shutter speed affects ambient but not flash exposure (up to a limit, as discussed below). The duration of a burst of flash is so brief that whether the shutter travels quickly or slowly, all of the flash burst reaches the sensor. That is, of course, assuming the entire sensor is exposed.
Indeed, the entire sensor is fully exposed at typical shutter speeds. At a high shutter speed, however, the rear curtain starts to close even before the front curtain has traveled completely, therefore the sensor is never fully exposed at any given time. When the flash is fired at these very high speeds, the part that is covered by the rear curtain will not be exposed to flash, leading to uneven exposure which is visible as a dark bar across the bottom or top of the image. The highest shutter speed where the entire sensor is fully exposed is the camera's sync speed. Typical sync speeds are 1/200 or 1/250, but sometimes as slow as 1/125 and as high as 1/500. (Trivia: medium format cameras with leaf shutter lenses can sync at all speeds, and point-and-shoots can sync at any speed because they don't have mechanical shutters :-D ) By default, cameras usually prevent the use of shutter speeds faster than the sync speed when the flash is being used.
Going back to the discussion, higher shutter speeds will nonetheless reduce ambient exposure. We use this to our advantage using the reciprocal relationship between shutter speed and aperture for any given exposure. Let's say it's a bright, sunny day, and the correct exposure is f/16 at 1/125 at 100 ISO. Under the reciprocity principle, you can get the same exposure with any of these combinations:
f/11 at 1/250 at 100 ISO
f/16 at 1/125 at 100 ISO
f/22 at 1/60 at 100 ISO
Of the three combinations above, the one that will require the least power from the flash is the one with the widest aperture, i.e., f/11 at 1/250 at 100 ISO.
Does that mean we should just use aperture priority and always choose the widest aperture to get the most from our flash? Not necessarily. If conditions are bright and aperture is wide, then the shutter speed can be pretty high -- higher than the sync speed. In the example above, suppose we had a lens that can go as wide as f/2.8. If we change aperture to f/2.8, the shutter speed for the same exposure would be 1/4000, which is way faster than the sync speed.
What about high speed sync mode? External flashes can fire at shutter speeds higher than the natural sync speed at the expense of output by firing many small flash bursts (instead of a single flash burst) while the rear curtain travels across the sensor. With HSS, however, the flash loses slightly more than 2 stops of output. In other words, it becomes more than 4x weaker. In other words, its range drops to slightly less than half. You get the idea.
In summary, if you want to maximize your flash while minimizing your ambient, shoot at the sync speed.
Monday, May 31, 2010
Stop Thinking (Advanced)
If you had a flash with a guide number of 41 meters, and added another flash of the same type, how much greater would your total guide number be? (Hint: it wouldn't be double.) The answer is easy if you think in terms of stops.
When I started learning photography, the sequence of apertures seemed strange to me (1.0, 1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, etc.). I wondered why smaller numbers were used to represent larger apertures, and why they didn't use integers instead. After having relied on aperture priority most of the time for a while and having learned more about lighting, the f-number sequence is making more sense.
The f-numbers are ratios of the focal length to the diameter of the opening. See http://en.wikipedia.org/wiki/F-number The sequence of f-numbers conveniently follows the inverse square law, and remembering them can help you calculate some photography math problems quickly.
Here is the general procedure:
1. Analyze the question in terms of stops.
2. For each stop, find the corresponding number on the f-number scale, with 1 stop being f/1.4, 2 stops being f/2.0 etc. Here is the f-number scale in 1/3 stop increments:
1.0, 1.1, 1.2, 1.4, 1.6, 1.8, 2, 2.2, 2.5, 2.8, 3.2, 3.5, 4, 4.5, 5.0, 5.6, 6.3, 7.1, 8, 9, 10, 11, 13, 14, 16, 18, 20, 22
3. The f-number is your multiplier (if adding light) or divisor (if reducing light).
The procedure can be reversed as well.
EXAMPLE 1: ADDING FLASHES
In the foregoing example, if you wanted to know the combined guide number of two flashes (each with a GN of 41 meters), first think of the increase or decrease in stops. Because you're doubling the flash power, that would be equivalent to a 1 stop increase. Using the f-number scale, 1 stop up from f/1.0 is f/1.4. So the multiplier is 1.4. To increase the guide number of 41 meters by 1 stop, multiply by 1.4 to get 57 meters. Here's confirmation from someone with a light meter: see http://www.flickr.com/groups/strobist/discuss/72157605926174798/
Suppose you used 4 flashes? That would be 4x the light of the single flash, i.e., 2 stops. The corresponding f-number is f/2. The multiplier would therefore be 2.0, or a total guide number of 82 meters.
What if you wanted to use the Lastolite Tri-Flash bracket
with 3 flashes? That would be triple the power of just one flash. Finding the total guide number would seem tricky at first but if you again think in terms of stops, it would be simplified. Triple the power would be 1.5 stops. Using the f-number scale, the f-number for 1.5 stops from f/1.0 is f/1.7. Using 1.7 as a multiplier, the total guide number of 3 flashes with a GN of 41 meters each would be a GN of about 70 meters.
EXAMPLE 2: COMPARING FLASHES
The SB-600 has a guide number of 30 meters at ISO 100 (at 35 mm zoom). Assuming that's true, if we used ISO 200, what would the equivalent guide number be? ISO 200 is 1 stop more than ISO 100, and the equivalent f-number on the f-number scale for 1 stop is f/1.4. The multiplying factor would therefore be 1.4, which means the guide number is 42 meters. And if we check out Nikon's website -- they indeed say the guide number is 42 meters at ISO 200.
What if we wanted to compare the power of an SB-800 to an SB-600? According to Nikon's website, the SB-800 has a guide number of 38 meters at ISO 100, at 35mm zoom. The SB-600 has a guide number of 30 at ISO 100, at 35mm zoom. (Manufacturers often inflate their guide numbers, but I'm supposing Nikon inflated the numbers for the SB-800 and SB-600 consistently.) The ratio of 38 to 30 is 1.26, which is a bit more than 1.2 (which would be 2/3 stop), which means the SB-800 has a bit more than 2/3 stop advantage over the SB-600.
Are you wondering how much more powerful is an AlienBee strobe compared to an SB-800? The SB-800 has a claimed guide number of 184 feet when zoomed to 105mm (ISO 100). With an 11-inch reflector, the B400 has a guide number of 220 feet (ISO 100). With an 11-inch reflector, the B1600 has a guide number of 450 feet (ISO 100).
Comparing the B400 to the SB-800: the ratio of 220 feet to 184 feet is 1.19 or around 1/2 stop to 2/3 stop.
Comparing the B1600 to the SB-800, the ratio of 450 feet to 184 feet is 2.44 or about 2.5 stops.
Comparing the B1600 to the B400, the ratio of 450 feet to 220 feet is 2.05, i.e., 2 stops.
EXAMPLE 3: INVERSE SQUARE LAW
Let's say you want a black background for your subject (let's define black for our purposes as 3 stops underexposure). Suppose the subject is properly exposed while at 10 feet away from the flash. How far away should the background be (assuming both the subject and background are gray) to become 3 stops underexposed (relative to the subject) from the same flash? Cross-referencing 3 stops with the f-number scale, we see the corresponding number is 2.8. That means the background has to be 2.8x further from the flash than is the subject, i.e., 28 feet away.
RELATED POSTS:
Right-Brained Guide to Combining Guide Number of Multiple Flashes
When I started learning photography, the sequence of apertures seemed strange to me (1.0, 1.4, 2, 2.8, 4, 5.6, 8, 11, 16, 22, etc.). I wondered why smaller numbers were used to represent larger apertures, and why they didn't use integers instead. After having relied on aperture priority most of the time for a while and having learned more about lighting, the f-number sequence is making more sense.
The f-numbers are ratios of the focal length to the diameter of the opening. See http://en.wikipedia.org/wiki/F-number The sequence of f-numbers conveniently follows the inverse square law, and remembering them can help you calculate some photography math problems quickly.
Here is the general procedure:
1. Analyze the question in terms of stops.
2. For each stop, find the corresponding number on the f-number scale, with 1 stop being f/1.4, 2 stops being f/2.0 etc. Here is the f-number scale in 1/3 stop increments:
1.0, 1.1, 1.2, 1.4, 1.6, 1.8, 2, 2.2, 2.5, 2.8, 3.2, 3.5, 4, 4.5, 5.0, 5.6, 6.3, 7.1, 8, 9, 10, 11, 13, 14, 16, 18, 20, 22
3. The f-number is your multiplier (if adding light) or divisor (if reducing light).
The procedure can be reversed as well.
EXAMPLE 1: ADDING FLASHES
In the foregoing example, if you wanted to know the combined guide number of two flashes (each with a GN of 41 meters), first think of the increase or decrease in stops. Because you're doubling the flash power, that would be equivalent to a 1 stop increase. Using the f-number scale, 1 stop up from f/1.0 is f/1.4. So the multiplier is 1.4. To increase the guide number of 41 meters by 1 stop, multiply by 1.4 to get 57 meters. Here's confirmation from someone with a light meter: see http://www.flickr.com/groups/strobist/discuss/72157605926174798/
Suppose you used 4 flashes? That would be 4x the light of the single flash, i.e., 2 stops. The corresponding f-number is f/2. The multiplier would therefore be 2.0, or a total guide number of 82 meters.
What if you wanted to use the Lastolite Tri-Flash bracket
EXAMPLE 2: COMPARING FLASHES
The SB-600 has a guide number of 30 meters at ISO 100 (at 35 mm zoom). Assuming that's true, if we used ISO 200, what would the equivalent guide number be? ISO 200 is 1 stop more than ISO 100, and the equivalent f-number on the f-number scale for 1 stop is f/1.4. The multiplying factor would therefore be 1.4, which means the guide number is 42 meters. And if we check out Nikon's website -- they indeed say the guide number is 42 meters at ISO 200.
What if we wanted to compare the power of an SB-800 to an SB-600? According to Nikon's website, the SB-800 has a guide number of 38 meters at ISO 100, at 35mm zoom. The SB-600 has a guide number of 30 at ISO 100, at 35mm zoom. (Manufacturers often inflate their guide numbers, but I'm supposing Nikon inflated the numbers for the SB-800 and SB-600 consistently.) The ratio of 38 to 30 is 1.26, which is a bit more than 1.2 (which would be 2/3 stop), which means the SB-800 has a bit more than 2/3 stop advantage over the SB-600.
Are you wondering how much more powerful is an AlienBee strobe compared to an SB-800? The SB-800 has a claimed guide number of 184 feet when zoomed to 105mm (ISO 100). With an 11-inch reflector, the B400 has a guide number of 220 feet (ISO 100). With an 11-inch reflector, the B1600 has a guide number of 450 feet (ISO 100).
Comparing the B400 to the SB-800: the ratio of 220 feet to 184 feet is 1.19 or around 1/2 stop to 2/3 stop.
Comparing the B1600 to the SB-800, the ratio of 450 feet to 184 feet is 2.44 or about 2.5 stops.
Comparing the B1600 to the B400, the ratio of 450 feet to 220 feet is 2.05, i.e., 2 stops.
EXAMPLE 3: INVERSE SQUARE LAW
Let's say you want a black background for your subject (let's define black for our purposes as 3 stops underexposure). Suppose the subject is properly exposed while at 10 feet away from the flash. How far away should the background be (assuming both the subject and background are gray) to become 3 stops underexposed (relative to the subject) from the same flash? Cross-referencing 3 stops with the f-number scale, we see the corresponding number is 2.8. That means the background has to be 2.8x further from the flash than is the subject, i.e., 28 feet away.
RELATED POSTS:
Right-Brained Guide to Combining Guide Number of Multiple Flashes
Subscribe to:
Posts (Atom)