Showing posts with label bounce card. Show all posts
Showing posts with label bounce card. Show all posts

Sunday, July 1, 2012

FlashRight Pro as Spinlight 360 Substitute (Part 1)



In this post, we'll discuss the Flashright Pro, a flash modifier by Peter Gregg, who catapulted into fame with A Better Bounce Card.  The Flashright Pro touts several features:
  • lightweight, compact design
  • directional: instead of sending light everywhere (such as in a dome diffuser), it sends light toward a direction 
  • rotates 360 degrees
  • diffuser
The Flashright Pro is intended to serve two primary functions: to direct bounced flash and to illuminate the subject with diffused light.  There is second version of the Flashright Pro, the Flashright Pro Extreme, that has a slot to accommodate 'ratio disks,' which are diffusers with varying sizes of holes.  The idea is to allow the photographer to control the proportion of light used as bounce flash and as diffused light.

The Flashright Pro was recently relaunched with a significant discount.  With its more practical price, I decided to get one, not for its original intended purpose, but as a substitute for Neil van Niekerk's black foamie thing (BFT) and the useful but expensive Spinlight 360.

Friday, September 3, 2010

Testing Neil's Bounce Technique (Basic)


(One of my early shots utilizing some of Neil's techniques)

Below are a series of test shots showing Neil van Niekerk's innovative technique of using the "black foamie thing."

BACKGROUND:

When I first started learning about flash in 2007, I lucked upon Neil van Niekerk's Tangents blog and immediately became a fan.  Up until then, I had known only about bouncing from ceilings.  From Neil's flash tutorial, I learned to balance flash and ambient, and control the direction of my bounce.  Little did I know that in my eagerness, I would miss one of Neil's key techniques.

One of Neil's innovations is the use of a sheet of black foam as a flag (a card to block light in one direction).  I truly mean innovative because the foam sheet (in white) was originally popularized by abetterbouncecard.com as a larger bounce card.  Neil however used it not so much to bounce light, but to block the light from the flash from hitting the subject, and he used a black foam sheet.

When I first read about Neil's black foamie thing, I didn't think it was an important technique.  My impression was that it was an extravagant waste of flash power, inconvenient, and wouldn't be of much benefit.  So I never tried it, being content merely to bounce with bare flash.  I went so far as to make a black foamie thing, but never ever used it.  Indeed, I even got highly retroreflective paper to augment the bounce efficiency of the bounce card, because I was still thinking of the foam sheet as a bounce card (instead of a flag).

Fast forward to 2009 when Neil published his book, On-Camera Flash.  As I read the chapter about flash modifiers, I began to understand the logic of using the black foamie thing as a flag.  Well, I finally got around to testing the difference that the black foamie thing makes.

TEST SHOTS

The differences between bare, white flagged and black flagged are most apparent when the flash is being aimed to provide a short light.  Note: I shot these test shots at sync speed to 'delete' the ambient (i.e., the light in these shots are virtually 100% flash) and I aimed the flash to a corner at camera left.

Bare flash (wide with diffuser):


Bare flash (zoomed):


White flag:

Black flag


As an experiment, I also tried increasing the efficiency of the black foamie by combining it with the white flag.  The white interior would bounce flash more efficiently while the black exterior would hide direct light from the flag from reaching the subject.

Black and white flag:

The effect seems to be in between the white flag and the black flag, though closer to the white flag's effect. Side by side for comparison:

Neil also described using a headband to allow flexibility in positioning the black foamie thing.  Here I tested the black foamie thing as a flag on the side of the flash.

Black flag on the side, flash at wide:


Black flag on the side, flash at zoom:

Needless to say, going forward, the black flag (or black and white flag) will be a technique that I will be using in my shots when possible.  I have a lot of catching up to do...!

Saturday, April 10, 2010

Double Bounce Card: a more versatile bounce card

Here's a simple and easy improvement over bounce cards such as Peter Gregg's www.abetterbouncecard.com: a double bounce card.  It consists of two foam bounce cards facing each other.

Here are its advantages over a regular bounce card:
1. Can be used in portrait orientation whether the camera is tilted clockwise or counterclockwise.

2. You can use the bounce card sideways on camera left or camera right order to add directionality.

3. Doubles as a snoot.

DOUBLE BOUNCE CARD AS SNOOT:

To give you an idea of how it performs as a snoot, here are comparison shots of a flash at 24mm and at 105mm, with and without the double bounce card as snoot:

Flash at 24mm without snoot:

Flash at 24mm with snoot:
Flash at 105mm without snoot:
Flash at 105mm with snoot:


Here are a few sample shots where I used the double bounce card as a snoot (flash was off-camera, triggered via CLS).




I don't have samples where I used the double bounce card as a bounce card because I believe in almost any situation where a bounce card can be used effectively, you can just bounce the flash directly and get better results.  (To learn why, please read this introduction to basic lighting)

EFFECT ON FLASH EXPOSURE:
The folded bounce card does cover the front of the flash.  Does this affect the flash exposure?  It depends.  On TTL mode, there is no effect on flash exposure because the flash exposure is measured through the camera lens, which is not covered by the folded bounce card.  On auto mode, where the flash exposure is measured by the flash itself, the folded bounce card will interfere with the flash exposure.  To learn more about TTL vs. auto mode, pls. read the TTL FAQ.

The folded bounce card may also interfere with the AF illumination (some external flashes project a red light on the subject to help the camera focus especially when it's dark).  Finally, the folded bounce card may also interfere with the ability to trigger the flash optically (if you're using it off-camera).